* Follow the instructions on the Tech 2 on OBD2TOOL.
#TIS2000 SOFTWARE HOW TO#
For that reason, TIS 2000 gives instructions as how to enter the missing vehicle data. Since the new ECU is not programmed on delivery, the retrieved information is not complete. If the ECU was replaced a “Request Info” has to be performed for the NEW unit. * During the Request Info the Professional Diagnostic Tool information from the selected device. Note: Depending on the model year and the selected model either a reprogramming of the ECU (F0: Engine) or of the TCM (F1: Transmission) can be selected. * For the selection of “Next” the vehicle has to be identified as requested by Tech 2. In that case, Tech 2 asks you to either use the current data (hold data) or request further information from the ECU (continue). * If Tech 2 has already stored vehicle data they will be displayed now. * Select “F1: Service Programming System (SPS)” in the main menu. * Turn ignition to ON without start the engine!!!
![tis2000 software tis2000 software](https://ae01.alicdn.com/kf/HTB1GLzSLXXXXXbRXpXXq6xXFXXXs/2019-New-Arrival-TIS-2000-Software-CD-and-USB-Dongle-TIS2000-for-TECH2-Program-Diagnostic-Tool.jpg)
Power on device – “Tech 2” is displayed on the screen, then press “ENTER”. On ‘Select Diagnostic Tool and Programming Process’ (picture below) screen make the desired selection forĢ) the reprogramming of an ECU that was not exchanged or the replacement/programming of a new ECU * Select the application ‘Service Programming System’ on the TIS 2000 start page.Ĥ. To register the hardware key select ‘Hardware Key Registration’ in the menu ‘Configuration’. Hardware keys that have already been registered are still valid!
![tis2000 software tis2000 software](https://www.obdii365.com/upload/pro/21051016207047289492.jpg)
![tis2000 software tis2000 software](https://www.obdfamily.com/photo/p1086132-360x360-tech2-diagnostic-scanner-for-gm-saab-opel-isuzu-suzuki-holden-with-tis2000-software-full-package-in-carton-box.jpg)
At first, the user receives a temporary code until the key is registered on the next TIS 2000 CD. In case the form is missing, the document is also in the TIS 2000 newsletter (see icon in the TIS 2000 tool bar). To register a hardware key, the form that is enclosed with the hardware key kit has to be filled in and sent to the address at the top. Note: The hardware key (HWK) has to be registered prior to working with ‘Service Programming System’. If you need to program Saab ECU, you had to use Saab TIS2000 and USB dongle.
#TIS2000 SOFTWARE SOFTWARE#
TIS2000 will not work on 2007 up GM, and software must work together with TIS2000 USB key. Here is the step-by-step instruction on programming GM (General Motors) ECUs with Tech 2 Scanner and SPS (Service Programming System) application in TIS2000.īefore using the SPS, make sure that the Tech 2 scan tool and the pc contain the latest software, the battery of the vehicle is fully charged, only the ignition is on power, and all cables are connected properly.